Why Is Water Leaking from the Bottom of My Washing Machine?
You might be asking, “Why is there a puddle of water at the bottom of my washing machine?” or you could be wondering why the washing machine is leaking. Regardless, this article will tell you everything you need to know about a leaking problem.
Why Is My Washing Machine Leaking Water From Underneath?
External Drain Hose
The external drain hose is what collects and drains the water from your washing machine. If you’re experiencing leaking from your washing machine, it could be a problem with this hose.
Checking the External Drain Hose
- Turn off the water supply valve.
- Open the door of your washing machine and look for an external drain hose that connects to the back of your machine. This will be a small tube with a black end cap on one end and may be connected to another hose that goes up into your house’s plumbing system.
- Look for signs of leakage or damage on this hose—you’ll know if there’s a problem if you see water pooling around where the hoses connect inside your washing machine cabinet.
- If there’s damage, you’ll need to replace this part entirely—it can’t be repaired—and then reconnect it according to manufacturer instructions (which should come with the new part).
- Turn on the water supply valve once repairs are complete. Test your washing machine by running it through its cycles normally without any clothes or other items inside; check for leaks after doing so!
Internal Drain Hose
The internal drain hose is a small piece of flexible tubing that runs from your washing machine’s drain pump to the bottom of the machine, where it connects to the drain pipe. It allows the washing machine to empty its dirty water into the drain pipe without getting clogged up with soap or other residuals.
Checking the Internal Drain Hose
- Unplug your washing machine, then remove all clothing and any other items from inside it, so they don’t get wet during this process.
- Take a look at your washing machine and see where it connects to the drain pipe. The hose should be visible on one side of your machine; if it isn’t, you may have to move some things around to get a better look at it.
- If there are any clogs or obstructions in this hose, they could be causing water to leak out of your washing machine. To fix this problem, remove whatever is blocking the hose by hand or using pliers (if necessary). Then replace any parts that were removed from inside of this hose—this should help stop it from leaking again!
If your washing machine is leaking, you may have a loose or missing hose clamp. This can happen if the washer isn’t level.
Checking the Hose Clamp
- Check the hoses and make sure that they’re securely connected. You should see a small rubber hose clamp on each end of each hose. If they’re loose, tighten them. If they’re missing altogether, replace them.
The tub seal is the rubber gasket that sits around the outer edge of your washing machine’s tub. It’s designed to prevent water from leaking out of your washer, but if it fails or is damaged, water can leak from under the front panel and down into the motor. Many things can cause a faulty tub seal, including detergent build-up on the seal, an old or worn out seal, or if the seal has been damaged by the washing machine being dropped.
Checking the Tub Seal
- Finding your tub seal can mean flipping your washing machine upside down and disassembling most of it. Because of this, it’d be best to leave this repair to a professional with the knowledge and tools to fix it accurately and efficiently.
Water Inlet Valve
This valve regulates how much water enters into each cycle and is connected via plastic tubing directly above where your water supply enters into your washing machine’s main body.
Checking the Water Inlet Valve
- Unplug your appliance and turn off its circuit breaker or power switch. Remove all hoses connected to the back of your washing machine and disconnect any electrical cords before proceeding with further inspection.
- Remove any screws that hold down the rear panel by turning them counterclockwise with a Phillips screwdriver until they are loose enough for you to pull up on them gently but firmly. Once these are out of place, remove them completely by hand.
- Check for damage and, if needed, replace with new fill valves using manufacturer instructions.
Frequently Asked Questions
What Happens if Water Gets Under a Washing Machine?
A leaking washing machine is not only annoying, but it can also cause water damage and mold growth in your home. It will also cause damage to the washing machine itself and possibly any electrical components in your home. If you have a washer leaking for some time, you may even need to replace the flooring or walls around it.
Is It Worth Fixing a Leaking Washing Machine?
If you’re handy and know how to fix things around the house, fixing your leaking washing machine could save you quite a bit of money. Depending on where the leak is coming from, it may be possible for you to do this yourself. If not, though, you should probably opt for hiring someone else. Buying a new washing machine is expensive, so it’s never a bad idea to get an expert opinion on whether or not they can fix your leaky machine and what parts they’ll need
Does Insurance Cover Washer Flooding?
To determine whether your insurance policy covers a washing machine flood, find out exactly what type of coverage you have. Some policies cover water damage, while others do not. If yours doesn’t, and your machine has flooded, you’ll need to pay for the repairs yourself.
Suffering From Water Damage? We Can Help!
Leaky washers can cause a world of water damage to your property. Sometimes, if it’s too far gone, it’s time to call in the pros to assess and fix any water damage that may have occurred thanks to your broken washing machine.
Contact our highly skilled and certified professionals at All Dry USA, available 24/7 and ready to help you when you need it most!